This section talks about using LCDproc with text mode VFD displays from Noritake Itron.
DEVICE
Port where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
Default: /dev/lcd
WIDTH
x
HEIGHT
Specifies the size of the LCD.
Default: 20x4
BRIGHTNESS
1200 | 2400 | 9600 | 19200 | 115200 }
Set the the baud rate to use when communicating with the VFD.
If not specified, it defaults to 9600.
yes | no }